Работа сервера #2

[Спутнег 1]

если хотите решить проблему, показывайте полный лог, а не агрызками и настройки без пароля покажите
040600 у нас давным давно идент не используется
средства не выводятся
собрались идти дальше, идите не хлопая громко дверью

p.s. и пишите в одной теме
проблема конкретно у вас

[Спутнег 1]

лог с канал, который вы пытаетесь смотреть

21:58:30.570 R1[newcamd525]: 2 ECM80 (0500:040620/2777.0) for DVB0[DVBAPI3] decoded (512/512/512 ms)
21:58:40.697 R1[newcamd525]: 2 ECM81 (0500:040620/2777.0) for DVB0[DVBAPI3] decoded (479/479/479 ms)
21:58:50.745 R1[newcamd525]: 2 ECM80 (0500:040620/2777.0) for DVB0[DVBAPI3] decoded (506/506/506 ms)
21:59:00.767 R1[newcamd525]: 2 ECM81 (0500:040620/2777.0) for DVB0[DVBAPI3] decoded (511/511/511 ms)

[ksasha]

Полный лог

-------------------------------------------------------------------------------
>> OSCam << ymod cardserver started at Tue Mar 22 18:58:38 2016
-------------------------------------------------------------------------------
2016/03/22 18:58:38 1856 77DA7000 s >> OSCam << ymod cardserver started, build #1856 (mipsel-tuxbox-linux)
2016/03/22 18:58:38 1856 77DA7000 s version=ymod, build #1856, system=mipsel-tuxbox-linux, nice=-1
2016/03/22 18:58:38 1856 77DA7000 s client max. idle=120 sec, debug level=0
2016/03/22 18:58:38 1856 77DA7000 s max. logsize=500 Kb
2016/03/22 18:58:38 1856 77DA7000 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2016/03/22 18:58:38 1856 77DA7000 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2)
2016/03/22 18:58:38 1856 77DA7000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/03/22 18:58:38 1856 77DA7000 s signal handling initialized (type=sysv)
2016/03/22 18:58:38 1856 77DA7000 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2016/03/22 18:58:38 1856 77DA7000 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2016/03/22 18:58:38 1856 77DA7000 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2016/03/22 18:58:38 1856 77DA7000 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2016/03/22 18:58:38 1856 77DA7000 s can't open file "/etc/tuxbox/config/oscam.keys" softcam keys not loaded
2016/03/22 18:58:38 1856 77DA7000 s monitor: initialized (fd=7, port=988)
2016/03/22 18:58:38 1856 77DA7000 s camd33: disabled
2016/03/22 18:58:38 1856 77DA7000 s camd35: disabled
2016/03/22 18:58:38 1856 77DA7000 s cs378x: disabled
2016/03/22 18:58:38 1856 77DA7000 s newcamd: disabled
2016/03/22 18:58:38 1856 77DA7000 s cccam: disabled
2016/03/22 18:58:38 1856 77DA7000 s radegast: disabled
2016/03/22 18:58:38 1856 77DA7000 s http thread started
2016/03/22 18:58:38 1856 7714F4A0 h HTTP Server listening on port 8888
2016/03/22 18:58:38 1856 77DA7000 s creating thread for device /etc/tuxbox/config/oscam/libdreemu.so
2016/03/22 18:58:38 1856 77DA7000 s creating thread for device /etc/tuxbox/config/oscam/libdreicg.so
2016/03/22 18:58:38 1856 77DA7000 s creating thread for device grp2.3usd.tv
2016/03/22 18:58:38 1856 77DA7000 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/03/22 18:58:38 1856 77DA7000 s waiting for local card init
2016/03/22 18:58:38 1856 757FF4A0 p proxy thread started (thread=757FF4A0, label=name, server=grp2.3usd.tv)
2016/03/22 18:58:38 1856 75FFF4A0 r reader thread started (thread=75FFF4A0, label=3kicg, device=/etc/tuxbox/config/oscam/libdreicg.so, detect=cd, mhz=357, cardmhz=357)
2016/03/22 18:58:38 1856 757FF4A0 p proxy grp2.3usd.tv:10000 newcamd525 (fd=17, port=10001)
2016/03/22 18:58:38 1856 767FF4A0 r reader thread started (thread=767FF4A0, label=3kemu, device=/etc/tuxbox/config/oscam/libdreemu.so, detect=cd, mhz=357, cardmhz=357)
2016/03/22 18:58:38 1856 767FF4A0 r 3kemu card detected
2016/03/22 18:58:38 1856 75FFF4A0 r 3kicg card detected
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] 3kicg: loading external library `/etc/tuxbox/config/oscam/libdreicg.so`
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] 3kemu: loading external library `/etc/tuxbox/config/oscam/libdreemu.so`
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] 3kemu: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreemu.so` initialization
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] DRElib (dre2 <36e> emu 03 internal master key group 66) version mipsel-tuxbox-linux
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] loading external file keys `/usr/keys/ee.bin`
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] 3kemu: CAID: 4AE1 - UA: 6600000000000000
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] 3kemu: adding provider 4AE1:000011, SA 66000000 (00000011)
2016/03/22 18:58:39 1856 767FF4A0 r [external-reader] 3kemu: ready for requests
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] 3kicg: using Init2 function for external library `/etc/tuxbox/config/oscam/libdreicg.so` initialization
2016/03/22 18:58:39 1856 767FF4A0 r found cardsystem external
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] DRElib (icg) version mipsel
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] using initial file `/etc/tuxbox/config/oscam/initial_snippet.bin`
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] 3kicg: CAID: 4AE1 - UA: 6600000000000000
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] 3kicg: adding provider 4AE1:0000FE, SA 66000000 (000000FE)
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] 3kicg: adding provider 4AE1:000011, SA 00000000 (00000011)
2016/03/22 18:58:39 1856 75FFF4A0 r [external-reader] 3kicg: ready for requests
2016/03/22 18:58:39 1856 75FFF4A0 r found cardsystem external
2016/03/22 18:58:39 1856 77DA7000 s init for all local cards done
2016/03/22 18:58:39 1856 77DA7000 s anti cascading disabled
2016/03/22 18:58:39 1856 74DFF4A0 c plain dvbapi-client granted (root, au=on (2 reader))
2016/03/22 18:58:39 1856 74DFF4A0 c dvbapi: 25 entries read from oscam.dvbapi
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: [ADD PID 0] CAID: 0500 ECM_PID: 1008 PROVID: 040610
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: [ADD PID 1] CAID: 0500 ECM_PID: 106C PROVID: 040620
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: [ADD PID 2] CAID: 0500 ECM_PID: 13F0 PROVID: 050B00
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: [ADD PID 3] CAID: 0500 ECM_PID: 1454 PROVID: 050A00
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: [ADD PID 4] CAID: 0500 ECM_PID: 1774 PROVID: 060A00
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: [ADD PID 5] CAID: 0500 ECM_PID: 183C PROVID: 060C00
2016/03/22 18:58:44 1856 74DFF4A0 c dvbapi: new program number: 42D0 (0500:42D0 unknown)
2016/03/22 18:58:44 1856 757FF4A0 p connecting to grp2.3usd.tv (port 10000, fd=17)
2016/03/22 18:58:50 1856 74DFF4A0 c dvbapi: try pids again #1
2016/03/22 18:58:50 1856 74DFF4A0 c root (0500&040620/42D0/106C/0000/42:4309/00-00): timeout (6047 ms) by name (try 2) - TV 1000 Premium HD
2016/03/22 18:58:57 1856 74DFF4A0 c dvbapi: try pids again #2
2016/03/22 18:58:57 1856 74DFF4A0 c root (0500&040620/42D0/106C/0000/42:4309/00-00): timeout (6173 ms) by name (try 2) - TV 1000 Premium HD
2016/03/22 18:58:57 1856 74DFF4A0 c dvbapi: try pids again #3
2016/03/22 18:58:57 1856 74DFF4A0 c dvbapi: can't decode channel
2016/03/22 18:58:57 1856 74DFF4A0 c root (0500&040620/42D0/106C/0000/42:433E/00-00): timeout (6009 ms) by name (try 2) - TV 1000 Premium HD
2016/03/22 18:59:03 1856 74DFF4A0 c dvbapi: can't decode channel
2016/03/22 18:59:03 1856 74DFF4A0 c root (0500&040620/42D0/106C/0000/42:433E/00-00): timeout (6104 ms) by name (try 2) - TV 1000 Premium HD

[ksasha]

[global]
nice = -1
WaitForCards = 1
setirdetoprov = 0
ecminfo_type = 0
maxlogsize = 500
pidfile = /tmp/oscam.pid
logfile = /tmp/oscam.log
#logfile = syslog:192.x.x.x:514

[monitor]
port = 988
aulow = 120
monlevel = 1
appendchaninfo = 1

[webif]
httpport = 8888
#httpuser = myusername
#httppwd = mypassword
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
user = root
boxtype = dreambox
chaninfo = 1
au = 1

#P: 0500:040600#NTV
P: 0500:040620#NTV, NTV+HD
#P: 0500:07400
#P: 0500:023100
#P: 0500:023800
#P: 0500:024F00
#P: 0500:041700
#P: 0500:042300
#P: 0500:042400
#P: 0500:042800
#P: 0500:042700
#P: 0500:043800
#P: 0500:040810
P: 4AE1:11::::102 1
P: 4AE1:000011::::102
P: 4AE1:000011::::10000102
P: 4AE1:000011:28
P: 4AE1:000014::::102
I: 2710:000018
I: 2710:000019
I: 4AE0:000000
I: 4AE0:000011
I: 4AE0:000015
I: 4AE1:000002
P: 0602:000000#Kontinent
P: 0652::::0000#Raduga
P: 0652::::0015#Raduga
P: 0652::::FFFF#Raduga
P: 0BAA:000000
P: 0B0F:000000
P: 0100:000068
P: 0654:000001
P: 0654:000077
P: 0654:000078
P: 090F:000000
P: 2600:000000
I: 0

[3kemu external /etc/tuxbox/config/oscam/libdreemu.so ua = 6600000000000000 params=/usr/keys/ee.bin ident=4ae1:11 postdr=3kicg delay=100 emmcache=1,3,2 group = 1]
[3kicg external /etc/tuxbox/config/oscam/libdreicg.so ua = 6600000000000000 params=/etc/tuxbox/config/oscam/initial_snippet.bin,/etc/tuxbox/config/oscam/snippet.tbl91 ident=4ae1:fe,11 emmfilter=91 delay=100 group=2]
[name newcamd grp2.3usd.tv 10000,10001,10002,10003,10004,10005,10006,10007,10010 X X]# Protocol Newcamd
#[name cs378x server port login parol д.п.]# Protocol cs378x
#[name cs357x server port login parol д.п.]# Protocol cs357x

[account]
user = root
pwd = drembox
group = 1
au = 3kemu,3kicg


C этими настройками почти год смотрел

[ksasha]

Вопрос закрыт. Проблема решена. Кажут оба сервера

[komp116]

Что то остановки по всем идут что случилось или перейти на другой сервер. Админы.

[Спутнег 1]

Что то остановки по всем идут что случилось или перейти на другой сервер. Админы.

пишите конкретней, что и где у вас останавливается
лог работы эмулятора покажите

[hjiz9]

Подскажите XTRA TV , на каком порту ?

[Спутнег 1]

10009 порт

[komp116]

А почему у меня все HD каналы в кубиках, а остальные нормально.